industrial plug and sockets

Features of Industrial Plugs Sockets

Industrial plug or socket with three or more poles with facilitated opening and safety eyelet
Industrial-type mobile electric socket and plug of easier assembling
Our industrial plugs are of Easy installation, long life and high-reliability
The industrial sockets can be Widely used in the machine industry, construction industry, and large vehicles.
The cases and sockets are produced of high-grade plastic nylon 66
The material of electric sockets and industrial plugs are extremely good insulating, thermal resistance up to +120 degrees, resistant against oil, gasoline and salt water, non-aging, resists cold and resistant against rain
All units not only fits with the same system but also are fully compatible with units of the same system of other manufacturers
HS Code : 8536 Electrical Apparatus for Switching or Protecting Electrical Circuits

---

Need a quotation for the industrial plug and sockets from our factory

You should let me know the specifications as below: (1) Current: 16A, 32A, 63A, 125A;
(2) Voltage: 110-130V, 220-240V, 380-415V or Colors: Yellow, Blue, Red;
(3) Poltes: 2P+E, 3P+E, 3P+N+E;
(4) IP Suitability Rating:IP44 (Ingress Protection; Solid bodies >=1.0mm; Splashing/Splashproof),
IP67 (Temporary immersion,watertight,waterproof).

---

IP Codes & Their Meanings

IP Suitability Rating
IP Suitability Ratings are an international system for classifying the degree of protection provided by enclosures of electrical equipment.
The higher the number, the greater the degree of protection;
they apply ONLY to properly installed equipment.
The numerals stand for the following: 1. First Number: Degree of protection for persons against access to hazardous parts inside the enclosure and/or against solid bodies.
IP 0 - Non-protected
1 – >= 50 mm diameter
2 – >=12.5 mm diameter
3 – >=2.5 mm diameter
4 – >=1.0 mm
5 – Dust-protected
6 – Dust-tight
2. Second Number: Degree of protection of equipment inside enclosures against damage from the ingress of water.

0 –Non-protected
1 – Vertically dripping
2 – Dripping (15° Tilted)
3 – Spraying
4 – Splashing
5 – Jetting
6 – Power jetting
7 – Temporary immersion
8 – Continuous immersion
Example:

---

IP44

IP44=Ingress Protection; Solid bodies >=1.0mm; Splashing

IP67

6 – Dust-tight
7 – Temporary immersion